Company News_NEWS_Fujian Bang-up Fluorine Plastic Product Co., Ltd



HOME
ABOUT US 
- Company Profile
- Certificate
NEWS 
- Company News
PRODUCTS 
CONTACT US
ONLINE STORE

+86-595-86306999

中文

English

Español

搜索





NEWS

Company News





Location：

Homepage

/

NEWS

/

Company News

What kind of plastic is fluoroplastic?

Fluoroplastics are paraffinic polymers in which some or all of the hydrogen is replaced by fluorine. They are polytetrafluoroethylene (PTFE), perfluoro(ethylene propylene) (FEP) copolymers, polyperfluoroalkoxy (PFA) resins, poly Chlorotrifluoroethylene (PCTFF), ethylene-chlorotrifluoroethylene copolymer (ECTFE), ethylene-tetrafluoroethylene (ETFE) copolymer, polyvinylidene fluoride (PVDF) and polyvinyl chloride (PVF).

17 2021-03-17

In-depth analysis of the properties and applications of polytetrafluoroethylene plastic king (PTFE)

Polytetrafluoroethylene (Poly tetra fluoroethylene), English abbreviation is PTFE, commonly known as "plastic king", brand name Teflon®, in China, due to pronunciation, the trademark "Teflon" is also called Teflon, iron Flon, Teflon, Teflon, Teflon, etc., are all transliterations of Teflon.

18 2022-01-18

In-depth analysis of the properties and applications of polytetrafluoroethylene plastic king (PTFE)

How many times is the raw material tape generally wound? What will happen if the PTFE raw material tape is wrapped too much?

1. How many laps are usually wrapped around the raw material belt

18 2022-01-18

How many times is the raw material tape generally wound? What will happen if the PTFE raw material tape is wrapped too much?

1. How many laps are usually wrapped around the raw material belt The polytetrafluoroethylene raw material tape is generally wound around the joint of the pipe fittings to achieve a sealing effect. Many friends do not know the specific number of turns, so how many turns of the raw material tape are appropriate?

29 2021-11-29

Surface fluorinated plastic materials and plastic films

The characteristics of fluorine gas can be used for low density polyethylene (LDPE), polyethylene (PE), polypropylene (PP), polyoxymethylene (POM), ethylene propylene diene rubber (EPDM), polybutylene terephthalate Ester (PBT), polycarbonate (PC), polyphenylene sulfide (PPS) and other plastic materials and plastic films are directly fluorinated on the surface to improve their surface energy, thereby greatly improving printing and other properties.

18 2022-01-18